Unit Claiming · Unit Claiming - Combo Skid · step 6 / 7

Step 6 — Skid Weight

Two-skid loop: the chain below is one skid pass; the app repeats it for skid 2, then weighs once.

1. Employee Auth2. Part Number3. Pallet Qty4. License Plate5. Serial Number6. Skid Weight7. Complete 
flowchart LR
    T1[Employee Auth]
    T2[Part Number]
    T3[Pallet Qty]
    T4[License Plate]
    T5[Serial Number]
    T6[Skid Weight]
    T7[Complete]
    T1 --> T2 --> T3 --> T4 --> T5 --> T6 --> T7
    style T6 fill:#0f5e8a,color:#fff
    click T1 "./01-employee-auth.html" "Open step"
    click T2 "./02-part-number.html" "Open step"
    click T3 "./03-pallet-quantity.html" "Open step"
    click T4 "./04-license-plate.html" "Open step"
    click T5 "./05-serial-number.html" "Open step"
    click T6 "./06-skid-weight.html" "Open step"
    click T7 "./07-skid-complete.html" "Open step"

Weigh skid

Wood Pallet Weight: 18.0   Claim: 40 × 2.50

Manual entry allowed only where the machine is configured for it; otherwise the scale feed fills the field.

Skid summary (live)

Employee Badge #:
11111
Model #:
M100-A
Pallet Id:
P-00412
Pallet Qty / Claimed:
40 / 40
Unit Weight:
2.50
Packaging Mat. Wt:
18.0
Est. Skid Wt (no top):
118.0
Actual Skid Weight:
118.4
Variance Allowed:
± 1.25
FAS Cell:
FAS-G1

Double-clicking a value jumps back to its step (SkipToCollectionStep).

Weight variance = Unit Weight × Tolerance Factor; outside variance blocks completion.

API layer

NEEDDoCalculations weight math + tolerance-factor read (03-claim; SetToleranceFactor UI dead since 2012)
DB ▸ UnitClaimingSkids (reads + writes)
NEEDCanSupervisorOverride variance override (spec/12-api/01-auth, path TBD)
DB ▸ UnitClaimingAppSecurity (0 rows — seed needed)

Validation

V-WGT-01Required + numeric — “Skid weight is required.”; non-numeric → “Only numeric values are valid.”
V-WGT-02Partial-claim ceiling — claim qty ≤ skid qty (“Error - Claim qty can not be more than skid qty.”); replacement skid IDs stricter (claim < skid qty).
V-WGT-03Partial qty required when partial-claim checked (“Error - Claim qty must be specified.”).
V-WGT-04Wood-pallet override section appears when the packaging includes a wood pallet; weight defaults from pallet-type table.
V-WGT-05Weight-variance supervisor override — CanSupervisorOverride badge check (GetPoundDiffAllowedForOverride tolerance). ❌ No web endpoint yet (spec/12-api/01-auth, path TBD).